You have likely experienced condensation on the sides of a water glass or dew drops on grass blades in the early mornings. That’s what we call dew. Dew Point on the other hand is defined as the temperature where the water vapour present in the air reaches its saturation point. As a result, the water vapour gets condensed into the form of water droplets.
You can always find water vapour in the atmospheric air, even when you’re experiencing a dry climate. And when the temperature of the outdoors fall below the dew point, that’s when rainfall occurs. That’s why before rainfall occurs, you get cold winds blowing towards you. The same can be said about the glass of water because the glass tends to be cooler than the dew point, which is why the water vapour in the air condenses. You must remember that condensation can happen anyplace and it can lead to the formation of ice or mould growth. However, with some proper procedures, the same can be mitigated.
The Usual Areas When Condensation Cause The Most Problems
According to professional services for a home inspection in Edmonton, windows form one of the most usual spots for the creation of condensation problems. This is because the glass inserts in the windows get cooled below the dew point. To learn its existence, you can easily cross-check whether there’s any presence of mould or mildew (even when moisture is not present). If there’s a presence of mould & mildew, then you can be sure that condensation has taken place.
Apart from the windows, the other place involves your bathroom, attic spaces and exhaust fans. Inside your bathroom, the moisture content will always remain high. The same can be said about the exhaust fan cavity because it’ll remain cooler than the dew point, which is why condensation will take place.
Can Dew Point Affect The Home Inspection Process?
Yes. The formation of condensation due to due point will affect your home inspection process. So, if you’re a prospective home buyer who has hired a competent home inspector for the task, you need to ensure that the process of the inspection goes smoothly. And to do that, you can accompany your home inspector and learn the locations where condensation is taking place. Even though your home inspection report will state the same, you can still proceed to see with your own eyes and thereby take precautionary measures afterwards.
How Can You Prevent Condensation From Wreaking Havoc?
When it comes to metal surfaces such as the exhaust fan, one of the major problems that are faced is corrosion or rusting. And when it comes to windows, apart from the formation of mould & mildew, you also have to keep in mind that any ice formation can break the seal in-between the panes or even crack the window glass.
Therefore, the only way through which you can prevent the formation of the dew point is by dehumidifying the house to the point where condensation doesn’t happen. And to do that, you need to purchase a separate dehumidifier unit for the same. You can also proceed to improve the insulation inside your home, which will keep your exhaust vents and attics warm, thereby eliminating condensation.
Furthermore, apart from the above-mentioned solutions, you can also proceed to improve the overall airflow of ventilation inside of your home. Better ventilation will remove dampness and lower the chances of condensation. Moreover, the chances of mould growth will also be lowered as a result.
We hope you enjoyed our comprehensive guide on the topic of dew point and for any additional queries, feel free to let us know.
