Because our society is so dependent on automobiles, many companies must have a large number of parking spaces. Owning a company means that safety is a primary responsibility for you. Solar parking lot lights, for example, maybe utilized to illuminate your parking lot.
However, the cost of a commercial solar parking lot lighting system is worthwhile. A long-term financial commitment, but one that will provide a constant stream of solar energy at “zero” prices in the long run. Purchasing solar panels and lights separately and installing them in your parking lot is one alternative while purchasing an integrated solar streetlight is the other.
For each Chevrolet, Chevrolet stamps a unique 17-digit VIN on the vehicle. Entering your vehicle’s VIN into a Chevy VIN Decoder will allow you to search for recalls and identify possible replacement components for your problematic vehicle. Now is the time.
Commercial Solar Parking Lot Light Buying Guide
Commercial solar parking lot lighting should take a few factors into account. Among them are lighting power density, light arrangement, and color quality; efficiency; intended outcomes; efficiency; and light dispersion. The best parking lot outcomes come from paying attention to these variables.
Almost all cities need some kind of parking lot illumination. These laws govern the quantity, timing, height, brightness, and the illumination of light. When choosing solar parking lot lights, this article will offer you a general idea of what to look for.
Motion Sensor and Passive Infrared (PIR)
This component is often found in solar parking lot lights. Heated objects release heat energy into the atmosphere. The PIR sensor measures infrared light and detects movement.
Diodes that Produce Light (LEDs)
Small microchips within the diode produce light in LEDs. An extremely efficient method of generating light may be found here. Unlike other light sources used in solar lights, they don’t degrade as soon. LEDs, on the other hand, experience a phenomenon known as lumen decay. As a result, the light fades away gradually over time. LEDs, on the other side, need less frequent replacement. LEDs are ideal for solar parking lot lighting.
Luminaire
Lightbulbs and other items needed to place, protect, and distribute light as well as to connect a power source are all considered luminaires in the context of a complete lighting system. You may also check with your country’s parking lot lighting requirements. Here are some suggestions to assist in your search for the finest solar parking lot lights to meet your specific requirements.
Efficacy of Light Sources
When purchasing solar parking lot lights, the lumen effectiveness rating is critical. It’s a ratio between the quantity of light produced and the energy used. To quantify solar parking lot lights, use the metric of lumens per watt (lm/w). Another way of putting it is to say that the light’s output is proportional to its power. A solar light with a high lumen output is not always the best choice. In addition, keep an eye on the luminaire’s light distribution.
Plan Ahead of Time
When it comes to selecting lighting fixtures, you need to know precisely what you’re looking for. Be sure to take note of the light’s dimensions and other specifics, too. Using this data, you may make an educated solar parking lot lighting choice. It’s critical to think about the kind and number of lighting your business will need.
The lighting needs of each site will vary. Lighting should be equal across the parking lot in order to avoid any distortion in video recordings caused by high-contrast lighting. High-contrast lighting may also produce blind spots for people and automobiles. Your parking lot’s security is in jeopardy as a result of this.
It’s vital to realize that if you select less powerful ones, you’ll need a lot more light for installation. Using fixed response switches and bi-level outputs to turn off luminaires during off-peak hours is also advised. As a consequence, your solar illumination will last longer.
Intensity Of Light
Various scenarios call for varying levels of light. The footcandle measures this (fc). The lux is the simplest method for determining the quantity of light that hits a surface. The quantity of light that falls on a surface may be measured using a light meter. The brightest and darkest parts should have at least a 4:1 (bright/dark) ratio.
However, a three-to-one ratio is preferable. The number of footcandles in a room is a good indicator of how well-lit it is. Color temperature (in degrees kelvin) is another factor to think about (K). This alters the light’s appearance in the parking lot, making it more noticeable.
A Solar Panel with a Battery
The solar lights are powered by a battery that stores the sun’s energy. Avoid lighting fixtures with huge battery capacity and corresponding solar panels at all costs. Check the solar panel/battery ratio and the luminaire power drain as well. You need to make sure that the battery can run the light for an extended amount of time and that the panel can charge the battery.
Conclusion
Choosing the best solar parking lot lights for your company isn’t a simple task for a business manager. In order to ensure your parking lot’s safety and security, consider installing solar illumination instead of conventional lighting.
